Featured
HazardWatch Fire and Gas System
1 Part Number(s)
An innovative, modular system that combines highly reliable programmable logic controller (PLC) technology with our advanced gas and flame field devices. It is highly scalable, making it suitable for small systems to large plant-wide applications. Offering intelligence, flexibility and reliability, the HazardWatch System's controller hardware configuration and software has been tested by Factory Mutual to verify NFPA 72 compliance.
Featured
FL4000H Multi-spectrum IR Flame Detector
1 Part Number(s)
The FL4000H is an advanced multi-spectrum infrared (MSIR) flame detector that provides superior false alarm immunity with the widest field of view. The FL4000H employs a multi-spectral optical IR sensing array with a sophisticated Neural Network Technology (NNT) system to reliably discriminate between actual flames and the vast majority of false alarm sources. The FL4000H detects typical fires such as alcohol, n-heptane, gasoline, jet fuels and hydrocarbons. It can also see through dense smoke produced by diesel, rubber, plastics and lube oil fires.
Featured
Rescue Utility System
17 Part Number(s)
The Rescue Utility System is primarily used for raising and lowering people or equipment in rescue and industrial work access and ideal for confined space applications. A 4:1 rescue pulley system Pulleys are equipped with a built-in anti-reversing lock. Offers rapid deployment, is virtually maintenance free, and is rated for two-person load.
10033360
RESCUE UTILITY SYSTEM,600 FT.
10035698
RESC UTILITY ASCENDER(R)W/ SECURING ROPE
10037101
RESC UTILITY ASCENDER(L)W/ SECURING ROPE
10047620
PULLEY RESCUE UTILITY SYSTEM LOWER
10079633
A23 SRS15800 RESCUE UTILITY SYSTEM 800'
10093608
RESCUE UTILITY SYSTEM, 500 FT.
10096821
A23 SRS15400 RESCUE UTILITY SYSTEM 420'
10101135
RESCUE UTILITY SYSTEM, 800 FT.
10113667
RESCUE UTILITY SYSTEM,300 FT.
SPP2230
PULLEY, UPPER, SURETYMAN
SRB4460
BAG, STORAGE, SURETYMAN R.U.S.
SRP210
SURETYMAN HAND ASCENDER LEFT
SRP220
ASCENDER, RIGHT HAND,SURETYMAN
SRS15200
Rescue Utility System, raising and lowering system with a 4:1 mechanical advantage
SRS15300
RESCUE UTILITY SYSTEM 300'
SRS15300BNR
RESCUE UTILITY SYSTEM KIT
SRS15400
RESCUE UTILITY SYSTEM 400'
Featured
Gravity® Temporary Horizontal Lifelines
27 Part Number(s)
MSA’s newly enhanced Gravity Temporary Horizontal Lifelines offer unique, exclusive bypass shuttles enabling two workers to share a line and pass each other while maintaining 100% tie-off.
The Gravity Temporary Synthetic Horizontal Lifeline, designed for easy installation and removal, suits many applications. System mounts to any suitable 5,000-lb-rated anchorage point and uses many standard components. Integral line tensioner helps to ensure proper lifeline tensioning.
10013150
Gravity Dyna-Line Temporary Horizontal Lifeline for Single Worker, 30' length rope, O-ring
10013151
Gravity Dyna-Line Temporary Horizontal Lifeline for Single Worker, 60' length rope, O-ring
10013152
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 30' length rope, O-rings (includes (2) polyester anchorage straps)
10013153
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 60' length rope, O-rings (includes (2) polyester anchorage straps)
10019085
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 100' length rope, O-rings (includes (2) polyester anchorage straps)
10022827
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 200' length rope, O-rings (includes (2) polyester anchorage straps)
10070288
HLL,DYNA-LINE,2-MAN,60',10' ANCH STRAPS
10128600
A23J SHL1009060BLK HLL, DISCON 37'X30'
10143584
A23J SHL1009060BLK HLL, DISCON SA/RG41'
10150413
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 30' length rope, Bypass Shuttles (includes (2) polyester anchorage straps)
10150414
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 60' length rope, Bypass Shuttles (includes (2) polyester anchorage straps)
10150415
Gravity Dyna-Line Temporary Horizontal Lifeline for Two Workers, 100' length rope, Bypass Shuttles (includes (2) polyester anchorage straps)
10150416
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 40' (12m), Bypass Shuttles
10150417
Gravity SureLine Iron Worker Cable Horizontal Lifeline System without turnbuckle, 40' (12 m), Bypass Shuttles
10150418
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 60' (18m), Bypass Shuttles
10150419
Gravity SureLine Iron Worker Cable Horizontal Lifeline System without turnbuckle, 60' (18 m), Bypass Shuttles
10150420
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 20' (6m), Bypass Shuttles
10150421
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 30' (9m), Bypass Shuttles
10150422
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 50' (16m), Bypass Shuttles
10150423
Gravity SureLine Temporary Horizontal Lifeline for Two Workers, 40' 12 M length black rope, Bypass Shuttles
10150424
Gravity SureLine Temporary Horizontal Lifeline for Two Workers, 60' 18 M length black rope, Bypass Shuttles
SHL1009035BLK
Gravity SureLine Temporary Horizontal Lifeline for Two Workers, 35' length black rope, O-rings
SHL1009060BLK
Gravity SureLine Temporary Horizontal Lifeline for Two Workers, 60' length black rope, O-rings
SHL2009040
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 40' (12m), O-Rings
SHL2009040IW
Gravity SureLine Iron Worker Cable Horizontal Lifeline System without turnbuckle, 40' (12 m), O-Rings
SHL2009060
Gravity SureLine Steel Cable Horizontal Lifeline System with turnbuckle, 60' (18m), O-Rings
SHL2009060IW
Gravity SureLine Iron Worker Cable Horizontal Lifeline System without turnbuckle, 60' (18 m), O-Rings
Featured
General Monitors S5000 Gas Monitor
1 Part Number(s)
It operates over a wide temperature range using a variety of gas sensing technologies. Breakthrough XCell® gas sensors with TruCal® technology extends calibration cycles up to 18 months and actively monitors sensor integrity for ultimate peace of mind.
Featured
FL500 UV/IR Flame Detector
1 Part Number(s)
The FL500 UV/IR Flame Detector monitors for radiation emitted by a flame in both the ultraviolet (UV) and infrared (IR) spectral ranges. This UV/IR combination provides a fast response time and increased false alarm immunity against sources of radiation for reliable protection.
Featured
Senscient ELDS™ Open Path Gas Detector
1 Part Number(s)
The Senscient ELDS laser-based open path gas detector is available for a wide range of toxic and flammable gases. The Senscient ELDS uses 'SimuGas' self-testing to eliminate employees entering hazardous areas for gas checks. Nuisance false alarms are virtually eliminated with its breakthrough Harmonic Fingerprint processing.
Featured
IR400 Point IR Gas Detector
2 Part Number(s)
The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features an industry-leading response time of ≤ 3 seconds, even with a splash guard installed. All electronics are contained within an explosion-proof housing so that the IR400's detector information can be processed locally. Configurations with analog output, Modbus and HART are also available.
ZN002A Three Zone Control Module
1 Part Number(s)
The ZN002A is a Zone Control Module for the Zero Two Series Fire and Gas Detection System. The ZN002A provides zoning and voting functions for three separate and independent zones of gas and / or flame detection.
FL3100H-H2 UV/IR Flame Detector for Hydrogen Applications
2 Part Number(s)
The FL3100H-Hydrogen is an Ultraviolet / Infrared flame detector designed specifically to detect hydrogen (H2) fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects H2 fires by monitoring in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms. Configurations with dual Modbus and HART are available. Modbus and HART data can be used for predictive maintenance. The flame detector's electronics are integral within its explosion-proof housing, allowing detector information to be processed at the point of detection.
Discontinued
SB100 Ultrasonic Bump Tester
2 Part Number(s)
The SB100 is a hand-held battery-operated rechargeable ultrasonic tester designed to bump test General Monitors ultrasonic gas leak detectors. The SB100 is useful for quick tests where physical access to the ultrasonic gas detector can be difficult. The unit can be used to bump test up to 18 meters away from the detector in Class 1, Div 1&2 hazardous areas.
Discontinued
FL3100H UV/IR Flame Detector
2 Part Number(s)
The FL3100H is an Ultraviolet / Infrared flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It monitors in both the ultraviolet (UV) and infrared (IR) spectral ranges, making it highly immune to false alarms.
The FL500 UV/IR Flame Detector is the replacement for the FL3100H detector. Learn all about its advanced performance specifications here.
Zero Two Series Gas and Flame Detection System
1 Part Number(s)
Modular system offering the widest range of control cards for use in an integrated fire and/or gas detection system. The Zero Two Series system can monitor any combination of the following: combustible gas, H2S, toxic gas, ultrasonic, oxygen deficiency and flame detection. In addition, its open architecture allows the system to accommodate other sensing devices for tasks such as smoke detection, heat detection and manual call points.
FL3101H UV Flame Detector
2 Part Number(s)
The FL3101H is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response. Configurations with dual Modbus and HART are available. Modbus and HART data can be used for predictive maintenance. The flame detector's electronics are integral within its explosion-proof housing, allowing detector information to be processed at the point of detection.
ARGC - Automatic Remote Gas Calibrator
2 Part Number(s)
To verify the proper operation of a catalytic combustible gas sensor, it is necessary to periodically apply a gas of known concentration to the sensor. This is usually done manually at the site with gas supplied from a small lecture bottle. As the sensor reacts to the calibration gas, adjustments are made to the monitoring system to bring its calibration into agreement with the known concentration of gas. At times, sensors are mounted in inaccessible locations, requiring expensive catwalks or scaffolding to reach them. The Automatic Remote Gas Calibrator (ARGC) allows the calibration gas to be applied to the catalytic bead sensor from easily accessible locations. The ARGC is used for blocking ambient air and redirecting methane to the catalytic sensor for calibration or testing sensor accuracy. The ARGC tests or calibrates the General Monitors catalytic sensor with 50% LEL methane. The unit is capable of calibrating gas at wind velocities up to 50 mph. Note: the RGC (P/N 80153-1), used manually with a pressure regulator (P/N 80147-1), is suitable for calibrating with any light hydrocarbon.
TransAire® 5 and TransAire® 10 Escape Respirator
3 Part Number(s)
These self-contained devices help personnel escape dangerous and deadly atmospheres, including those with high concentrations of toxic gases or vapors or oxygen deficiency. Low profile, lightweight, and easy to carry, these escape respirators feature one-control operation for a swift exit.
10008293
TransAire 10 Escape Respirator complete (includes aluminum cylinder, carrier, hood tube, hood assembly)
10066740
TransAire 10 Escape Respirator complete, less air (includes aluminum cylinder, carrier, hood tube, hood assembly)
10083327
TransAire 10 Escape Respirator complete (includes fully-wound carbon fiber cylinder, carrier, hood tube, hood assembly)
RGC - Remote Gas Calibrator for Catalytic Bead Sensors
2 Part Number(s)
The Remote Gas Calibrator (RGC) allows calibration gas to be applied to a remotely located catalytic bead sensor from an easily accessible location. The RGC is used for blocking ambient air and redirecting methane to the catalytic sensor for calibration or testing sensor accuracy. The RGC tests or calibrates the General Monitors catalytic sensor with 50% LEL methane. The unit is capable of calibrating gas at wind velocities up to 50 mph. The RGC is used manually with a pressure regulator (P/N 80146-1) and is suitable for calibrating with any light hydrocarbon.
Comfo Classic® Half-Mask Respirator
6 Part Number(s)
The SoftFeel® facepiece of the Comfo Classic Half-Mask Respirator makes this unit dramatically more comfortable. The material increases the softness of both Hycar rubber and silicone, which are the two facepiece materials available with Comfo Classic respirators. The unit's unique face seal design also provides an exceptional fit.
808071
Comfo Classic Facepiece, SoftFeel silicone, Black
808072
Comfo Classic Facepiece, SoftFeel silicone, Black
808073
Comfo Classic Facepiece, SoftFeel silicone, Black
808074
Comfo Classic Facepiece, SoftFeel hycar, MEDIUM
808075
Comfo Classic Facepiece, SoftFeel hycar, SMALL
808076
Comfo Classic Facepiece, SoftFeel hycar, LARGE
Catalytic Bead Sensors
16 Part Number(s)
The General Monitors catalytic bead gas sensors are well known for their sensitivity, reliability and longevity and make them the first choice for most users of the catalytic oxidation gas detection principle. Every component is manufactured in-house to ensure optimum performance. Careful matching of the active and reference elements ("beads") result in a sensor that has negligible zero drift with respect to changes in humidity, pressure, and temperature.
10001-1
Standard industrial hydrocarbon sensor, aluminum
10001-1R
Poison resistant industrial hydrocarbon sensor, aluminum
10014-1
Hi-temp industrial hydrocarbon sensor, aluminum
10014-1R
Hi-temp, poison resistant industrial hydrocarbon sensor, aluminum
10015-1
Hi-temp industrial hydrocarbon sensor for export, aluminum
10022-1
Sintered industrial hydrocarbon sensor, aluminum
10058-1
Standard industrial hydrocarbon sensor, stainless steel
10058-1R
Poison resistant industrial hydrocarbon sensor, stainless steel
10102-1
Sensor simulator for combustible gas
10164-1
Hydrogen specific sensor, aluminum
10387-4
Super poison resistant industrial hydrocarbon sensor, aluminum
11159-1
Standard industrial hydrocarbon sensor, stainless steel, ATEX
11159-1L
Standard industrial hydrocarbon sensor, stainless steel, ATEX (with lugs)
11159-2
Hi-temp industrial hydrocarbon sensor, stainless steel, ATEX
11159-2L
Hi-temp industrial hydrocarbon sensor, stainless steel, ATEX (with lugs)
Contact customer service for ordering information
S4000TH H2S Gas Detector
2 Part Number(s)
The S4000TH Intelligent Gas Sensor is a microprocessor-based transmitter designed for use with General Monitors' thin film metal oxide semiconductor (TFMOS) sensors to detect H2S gas. The unit features one person calibration and can virtually self-calibrate by simply activating a magnetic switch and applying gas. It detects hydrogen sulfide in 0-20 ppm, 0-50 ppm or 0-100 parts per million (ppm) levels over a wide temperature range.
