Freestanding Constant Force® Post
MSA's Latchways® Freestanding Constant Force post provides assured worker safety at height where there is an occasional or temporary requirement to access flat roofs or structures.
Freestanding Constant Force® Post
Part Number
Description
65640-00 660lb/300kg Single Point Anchor for One-User (includes Constant Force Post and Weight Plates)
660lb/300kg Single Point Anchor for One-User (includes Constant Force Post and Weight Plates)
65641-00 220lb/100kg Upgrade Kit for additional weight (includes 4x 25kg plates and 4x nut/bolt/washers/end cap assembly)
220lb/100kg Upgrade Kit for additional weight (includes 4x 25kg plates and 4x nut/bolt/washers/end cap assembly)
65644-00 880lbs/400kg Single Point Anchor for One-User (includes Constant Force Post and Weight Plates)
880lbs/400kg Single Point Anchor for One-User (includes Constant Force Post and Weight Plates)
85032-00 Articulating D-Ring (used in conjunction with 65640-00 or 65644-00)
Articulating D-Ring (used in conjunction with 65640-00 or 65644-00)
At the heart of the system is MSA’s unique Constant Force Technology. The Constant Force Post is contained within an anchor device consisting of a galvanized steel frame and galvanized steel weights bolted in a circular formation onto rubber coated base weights. In the event of a fall, the Constant Force post deploys to limit the load on the system while the weights simultaneously create a friction anchor between the unit and the roof surface.
- Applicable where there is an occasional safety at height requirement
- Suitable for flat roofs (maximum 5° pitch)
- Can be used on a wide range of roof surfaces including concrete, single-ply membrane, bituminous membrane, sanded and stone chipping asphalt, and steel profile
- No need to puncture the roof membrane to fix the system
- Special rotating anchor turns through 90° for maximum user flexibility
- Each anchor device protects a single user
- Conforms to OSHA 1910.66 App C & 1926.502 clause (d) (15)
- Conforms to BS EN 795 Class E
Markets:
Construction,
General Industry,
Mining,
Oil & Gas,
Utilities
Applications:
Working at Heights
Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.
- Conforms to OSHA 1910.66 App C & 1926.502 clause (d) (15)
- Conforms to BS EN 795 Class E
